BiTel

set radius retries 2
   set radius timeout 10
   set radius server 10.0.0.5 secret
   set radius me 10.0.0.1

ngctl: send msg: File exists
ngctl: line 1: error in file

startup:
    set user foo bar admin
    set console self 127.0.0.1 5005
    set console open


radius:
    set auth disable internal
    set auth max-logins 1 CI
    set auth enable radius-auth
    set auth enable radius-acct
    set auth acct-update 60
    set radius server IP.адрес.BGB.RADIUS-а RADIUS-секрет 1812 1813
    set radius me IP.адрес.MPD.машины
    set radius timeout 15
    set radius retries 3


default:
    set ippool add stat 192.168.255.100 192.168.255.200

    create bundle template B
    set ipcp ranges 127.0.0.1/32 ippool stat
    set ipcp dns IP.адрес.DNS.сервера
    set ipcp no vjcomp
    set ipcp no req-pri-dns
    set ipcp no req-sec-dns
    set ipcp no req-pri-nbns
    set ipcp no req-sec-nbns


    create link template L pppoe
    set link action bundle B
    set link max-children 1000
    set link no multilink
    set link no shortseq
    set link no chap eap pap
    set link enable pap
    set pppoe acname Internet
    load radius


    create link template 100 L
    set pppoe iface vlan100
    set link enable incoming

    create link template 200 L
    set pppoe iface vlan200
    set link enable incoming

    create link template 300 L
    set pppoe iface vlan300
    set link enable incoming

startup:
    set netflow self IP.адрес.MPD.машины порт
    set netflow peer IP.адрес.BGB.RADIUS-а порт
    set netflow timeouts не_активн. активн.


default:
    create bundle template B
    set iface enable netflow-in
    set iface enable netflow-out

startup:
        # configure mpd users
        set user foo bar admin
        set user foo1 bar1
        # configure the console
        set console self 127.0.0.1 5005
        set console open
        # configure the web server
        set web self 0.0.0.0 5006
        set web open
        set ippool add sat  192.168.169.1 192.168.169.255
       set netflow peer 192.168.105.5 2001
       set netflow self 192.168.105.17 32345
       set netflow timeouts 10 10
default:
       load pptp_server
       pptp_server:
       create bundle template pptp_b
       set iface enable netflow-in
       set iface enable netflow-out
       set iface enable tcpmssfix
       set ipcp yes vjcomp
       set ipcp ranges 192.168.5.1/32 ippool sat
       set ipcp dns 192.168.64.254 192.168.64.252
       set bundle enable compression
       set ccp yes mppc
       set mppc yes compress
       set mppc yes e40
       set mppc yes e56
       set mppc yes e128
       set mppc yes stateless
       create link template pptp_link pptp
    set link action bundle pptp_b
    set link enable multilink
    set link yes acfcomp protocomp
    set link no pap chap
    set link enable chap
    set link keep-alive 10 60
    set link mtu 1460
    set pptp self 192.168.105.17
    set link enable incoming
    set auth enable radius-auth
    set auth enable radius-acct
    set radius enable report-mac
    set radius me 192.168.105.17
    set radius retries 3
    set radius timeout 10
    set radius server 192.168.105.5     12345678        1812    1813

cd /usr/ports/net-mgmt/aggregate && make install clean

# cat net_list.txt | aggregate -q
192.168.0.0/21
192.168.8.0/23

192.168.0.0/24
192.168.1.0/24
192.168.2.0/24
192.168.3.0/24
192.168.4.0/24
192.168.5.0/24
192.168.6.0/24
192.168.7.0/24
192.168.8.0/24
192.168.9.0/24

#!/bin/sh

if [ -z "$*" ]; then
    exit 0
fi

mpd_host='127.0.0.1'
mpd_port='5005'
mpd_user='foo'
mpd_pass='bar'

if [ $1 = '-s' ]; then
    if [ -n "$4" ]; then
        port=`printf "$mpd_user\r$mpd_pass\rshow sessions\rexit\r" | nc -4n $mpd_host $mpd_port | grep -E 'ng[0-9]+' | awk '{print $6}'`
        if [ -n "$port" ]; then
            if [ $4 -eq $port ]; then
                printf "$mpd_user\r$mpd_pass\rlink [%X]\rclose\rexit\r" $4 | nc -4n $mpd_host $mpd_port > /dev/null 2>&1
                exit 0
            fi
        fi
    fi
fi

if [ $1 = '-g' ]; then
    echo $2
    echo 'string'
    check_port=`echo $2 | sed s/'.1.3.6.1.4.1.2021.255.'//g | awk '{print $1}'`
    sessions=`printf "$mpd_user\r$mpd_pass\rshow sessions\rexit\r" | nc -4n $mpd_host $mpd_port | grep -E 'ng[0-9]+' | awk '{print $6":"$8}'`
    for i in $sessions; do
        port=`echo $i | sed s/:/' '/g | awk '{print $1}'`
        if [ $port -eq $check_port ]; then
            user=`echo $i | sed s/:/' '/g | awk '{print $2}'`
            break
        fi
    done
    if [ -z $user ]; then
        echo '-'
    else
        echo $user
    fi
fi

attrset.1.attributes=mpd-filter=1#1=match dst net 82.200.107.0/27 and src net 192.168.120.0/24;mpd-filter=2#1=match src net 82.200.107.0/27 and dst net 192.168.120.0/24;mpd-limit=in#1=flt1 pass;mpd-limit=in#2=all shape 64000 4000 pass;mpd-limit=out#1=flt2 pass;mpd-limit=out#2=all shape 64000 4000 pass;

attrset.1.attributes=mpd-filter=1#1=match dst net x.x.x.x and dst net y.y.y.y and dst net z.z.z.z;mpd-filter=2#1=match src net x.x.x.x and src net y.y.y.y and src net z.z.z.z;mpd-limit=in#1=flt1 pass;mpd-limit=in#2=all shape 64000 4000 pass;mpd-limit=out#1=flt2 pass;mpd-limit=out#2=all shape 64000 4000 pass;

mpd-filter=1#1=match dst net x.x.x.0/24;
mpd-filter=1#2=match dst net y.y.y.0/24;
mpd-filter=2#1=match src net x.x.x.0/24;
mpd-filter=2#2=match src net y.y.y.0/24;
mpd-limit=in#1=flt1 pass;
mpd-limit=in#2=all rate-limit 256000 pass;
mpd-limit=out#1=flt2 pass;
mpd-limit=out#2=all shape 256000 pass

attrset.1.title=256k
attrset.1.attributes=mpd-filter=1#1=match dst net x.x.x.0/24;mpd-filter=1#2=match dst net y.y.y.0/24;mpd-filter=2#1=match src net x.x.x.0/24;mpd-filter=2#2=match src net y.y.y.0/24;mpd-limit=in#1=flt1 pass;mpd-limit=in#2=all rate-limit 256000 pass;mpd-limit=out#1=flt2 pass;mpd-limit=out#2=all shape 256000 pass

#!/bin/sh

mpd_host='127.0.0.1'
mpd_port='5005'
mpd_user='foo'
mpd_pass='bar'

sessions=`printf "$mpd_user\r$mpd_pass\rshow sessions\rexit\r" | nc -4n $mpd_host $mpd_port | grep -E 'ng[0-9]+' | awk '{print $5}'`

cnt=0

for i in $sessions; do
    cnt=$(($cnt + 1))
done

echo $cnt